Note: this is not a commercial - the list is intended to answer the frequently question " where can I get ..."
Sorry, no more pictures - this has become necessary to reduce the risk of possible copyright infringements. If you are a manufacturer and want to see your product or a picture, please send me the corresponding data and a statement that you permit me to publish the picture on this web site.
| Bolly Racing Products Units 8-9 100 Hewittson Road Elizabeth West South Australia Australia 5113 bolly@bolly.com.au |
«Piel CP-80» (F3D) wing span: 1.320 m A pretty plane, great for training and beginners kit type: GF Best Time: 76s |
| «Stiletto» (F3D) wing span: 1.448 m kit type: GF Best Time: 68s |
|
| «Python» (F3D) wing span: 1.372 m kit type: GF Best Time: 71s with OPS .40, Bolly P42 pipe and Bolly P-10 prop |
|
| Simprop Electronic Simprop Electronic Ostheide 5 33428 Harsewinkel Germany |
«Viper» (Quickie 500) wing span: 1.321 m wing area: 0.345 m² kit type:WB |
| Flugapparatebau Wolf Erlacher Str.16 97828 Zimmern Germany Phone: (+49/0)9391 7909 Fax: (+49/0)9391 914 358 E-Mail: cwolf@mayn.de |
«Dago Red
Innovation» |
| Rich Tocci 544 Shadowcrest Ln. Coppell, TX 75019 (214)462-0459 USA |
«Stiletto QM» «Nemesis QM40» kit types: CC |
| Paul's Flying Stuff PO Box 121 Escondido, CA 92033 (619)743-5458 USA |
«Cosmic Wind F1» «DeNight Special F1» «Thunder Quickie II» |
| SAMURAI Gary Hover 16016 Ave. 288 Visalia, CA 93292 USA Phone: (209)747-0701 |
«KAZE» «Stiletto» |
| Small Creations 3204 Johnson Road Southlake, TX 76092 USA Phone: (817)379-6468 |
«Kaze Killer QM 40» «Kaze Killer FAI/F1» |
| California Speed Pro 26612 Las Tunis Drive Mission Viejo, CA 92692 USA Phone: (714)365-1155 |
«Q500» «Shark F1» «Toni F1» «Midget Mustang F1» |
| Modelcraft Freedom
Kits England |
produces several kits, mostly for «Club 20» and «Sport 40» events |
| Jet & Speed Models Netherlands Haarlem, NL |
«Beretta» a small model for .21 engines |
Fly Fast Composites Q 500 in composite material |
«NEME-Q» |
| H & M Racing Inc. 2221-95th Street North Battleford, Sask, S9A 3G2 Canada Phone: (306) 446-4021 Fax: (306) 446-4342 hm.racing@sasktel.net |
«MissCandice - Q40» «Kaze 500 - Q500» «SR2 - FAI F3D model» |
CC: Composite fuselage, composite wing
GF: Glass/Epoxy fuselage, sheeted foam wings
WK: wood, kit, puzzle
WB: wood, already built up, needs finish
ARF: almost ready to fly, includes finish
Last modification of this page: 02.04.06
[Back to Home Page] Suggestions? Corrections? Remarks? e-mail: Martin Hepperle.
Due to the increasing amount of SPAM mail, I have to change this e-Mail address regularly. You will always find the latest version in the footer of all my pages.
It might take some time until you receive an
answer and in some cases you may even receive no answer at all. I apologize for
this, but my spare time is limited. If you have not lost patience, you might
want to send me a copy of your e-mail after a month or so.
This is a privately owned, non-profit page of purely educational
purpose. Any statements may be incorrect and unsuitable for practical usage. I
cannot take any responsibility for actions you perform based on data,
assumptions, calculations etc. taken from this web page.
© 1996-2006 Martin Hepperle
You may use the data given in this document for your personal use. If you use
this document for a publication, you have to cite the source. A publication of a
recompilation of the given material is not allowed, if the resulting product is
sold for more than the production costs.
This document may accidentally refer to trade names and trademarks, which are owned by national or international companies, but which are unknown by me. Their rights are fully recognized and these companies are kindly asked to inform me if they do not wish their names to be used at all or to be used in a different way.
This document is part of a frame set and can be found by navigating from the entry point at the Web site http://www.MH-AeroTools.de/.