x y 100.000 0.000 99.664 -0.035 98.652 -0.122 96.969 -0.219 94.638 -0.294 91.687 -0.322 88.152 -0.273 84.076 -0.108 79.541 0.230 74.678 0.758 69.605 1.449 64.425 2.263 59.243 3.151 54.162 4.022 49.205 4.749 44.325 5.285 39.516 5.654 34.813 5.873 30.252 5.954 25.877 5.909 21.731 5.746 17.856 5.473 14.288 5.097 11.065 4.627 8.214 4.072 5.760 3.442 3.722 2.753 2.116 2.024 0.950 1.277 0.231 0.552 0.000 -0.064 0.358 -0.635 1.287 -1.261 2.691 -1.898 4.549 -2.506 6.846 -3.060 9.567 -3.538 12.696 -3.927 16.217 -4.219 20.105 -4.417 24.326 -4.523 28.842 -4.547 33.607 -4.496 38.572 -4.377 43.686 -4.200 48.892 -3.976 54.132 -3.715 59.343 -3.427 64.464 -3.120 69.434 -2.800 74.195 -2.473 78.692 -2.144 82.874 -1.819 86.693 -1.506 90.097 -1.213 93.044 -0.940 95.497 -0.690 97.425 -0.461 98.817 -0.244 99.689 -0.068 100.000 0.000
Last modification of this page: 04.10.04
[Back to Home Page] Suggestions? Corrections? Remarks? e-mail: Martin Hepperle.
Due to the increasing amount of SPAM mail, I have to change this e-Mail address regularly. You will always find the latest version in the footer of all my pages.
It might take some time until you receive an
answer and in some cases you may even receive no answer at all. I apologize for
this, but my spare time is limited. If you have not lost patience, you might
want to send me a copy of your e-mail after a month or so.
This is a privately owned, non-profit page of purely educational
purpose. Any statements may be incorrect and unsuitable for practical usage. I
cannot take any responsibility for actions you perform based on data,
assumptions, calculations etc. taken from this web page.
© 1996-2005 Martin Hepperle
You may use the data given in this document for your personal use. If you use
this document for a publication, you have to cite the source. A publication of a
recompilation of the given material is not allowed, if the resulting product is
sold for more than the production costs.
This document may accidentally refer to trade names and trademarks, which are owned by national or international companies, but which are unknown by me. Their rights are fully recognized and these companies are kindly asked to inform me if they do not wish their names to be used at all or to be used in a different way.
This document is part of a frame set and can be found by navigating from the entry point at the Web site http://www.MH-AeroTools.de/.