Designed for allround RC-gliders (e.g. FAI class
F3B)
Has been used on the sailplane Wizard.
Image (7 kBytes)
Image (6 kBytes) - free
transition
Image (6 kBytes) - fixed
transition on upper surface at 50%x y 100.000 0.000 99.672 0.020 98.704 0.092 97.125 0.236 94.974 0.461 92.294 0.770 89.133 1.160 85.546 1.625 81.587 2.150 77.311 2.719 72.776 3.317 68.039 3.924 63.160 4.520 58.197 5.080 53.203 5.576 48.221 5.987 43.291 6.296 38.456 6.495 33.754 6.576 29.226 6.540 24.909 6.387 20.841 6.121 17.057 5.749 13.590 5.280 10.470 4.722 7.724 4.091 5.372 3.398 3.433 2.662 1.918 1.903 0.832 1.150 0.184 0.450 0.000 0.000 0.012 -0.104 0.417 -0.563 1.410 -1.022 2.911 -1.450 4.902 -1.826 7.364 -2.133 10.283 -2.357 13.649 -2.499 17.434 -2.571 21.598 -2.585 26.096 -2.549 30.876 -2.469 35.884 -2.351 41.065 -2.200 46.360 -2.023 51.709 -1.828 57.052 -1.620 62.324 -1.404 67.468 -1.186 72.424 -0.972 77.135 -0.770 81.543 -0.588 85.590 -0.430 89.223 -0.300 92.394 -0.198 95.058 -0.122 97.178 -0.068 98.732 -0.030 99.675 -0.007 100.000 0.000This airfoil has originally been published in [7].
Last Update: 8.3.1997
Last modification of this page: 04.10.04
[Back to Home Page] Suggestions? Corrections? Remarks? e-mail: Martin Hepperle.
Due to the increasing amount of SPAM mail, I have to change this e-Mail address regularly. You will always find the latest version in the footer of all my pages.
It might take some time until you receive an
answer and in some cases you may even receive no answer at all. I apologize for
this, but my spare time is limited. If you have not lost patience, you might
want to send me a copy of your e-mail after a month or so.
This is a privately owned, non-profit page of purely educational
purpose. Any statements may be incorrect and unsuitable for practical usage. I
cannot take any responsibility for actions you perform based on data,
assumptions, calculations etc. taken from this web page.
© 1996-2005 Martin Hepperle
You may use the data given in this document for your personal use. If you use
this document for a publication, you have to cite the source. A publication of a
recompilation of the given material is not allowed, if the resulting product is
sold for more than the production costs.
This document may accidentally refer to trade names and trademarks, which are owned by national or international companies, but which are unknown by me. Their rights are fully recognized and these companies are kindly asked to inform me if they do not wish their names to be used at all or to be used in a different way.
This document is part of a frame set and can be found by navigating from the entry point at the Web site http://www.MH-AeroTools.de/.