A typical F5B Model
  • Wing Span: 1700 mm
  • Wing Area: 0.29 sqm
  • Length: 1000 mm
  • Engine: Robbe PRO series contest engines
  • Battery: 27 cell pack
  • Propeller: 12 x 8 inch ... 15 x 12 inch
  • Weight: 2400 g
  • Airfoil: MH 30
    •

    F5B Model MANTIKOR; design © 1994 by Dr. Christian Baron.

    F5B world championship 1994 Wangaratta, Australia:

    1. Jerry Bridgeman, U.S.A.; airfoil: S 7012; model: SE12
    2. Rudi Freudenthaler, Austria; airfoil: RG 14; model Surprise IV
    3. Willi Schäffer, Germany; airfoil: MH 30; model: MANTIKOR

     

    Wolfgang Fickenscher has been very successful in 2001 and 2002 with his own F5B model, using an MH airfoil.
    (Photo © Wolfgang Fickenscher)

    F5B European championship 1995 Oberpullendorf, Austria:

    1. Urs Leodolter, Switzerland; airfoil: MH 30; model: Limit II
    2. Rudi Freudenthaler, Austria; airfoil: RG 14; model Surprise V
    3. Kurt Hainzl, Austria; airfoil: RG 15; model: Conan

     

    Last modification of this page: 08.09.03

    [Back to Home Page] Suggestions? Corrections? Remarks? e-mail: Martin Hepperle.

    Due to the increasing amount of SPAM mail, I have to change this e-Mail address regularly. You will always find the latest version in the footer of all my pages.

    It might take some time until you receive an answer and in some cases you may even receive no answer at all. I apologize for this, but my spare time is limited. If you have not lost patience, you might want to send me a copy of your e-mail after a month or so.
    This is a privately owned, non-profit page of purely educational purpose. Any statements may be incorrect and unsuitable for practical usage. I cannot take any responsibility for actions you perform based on data, assumptions, calculations etc. taken from this web page.

    © 1996-2006 Martin Hepperle
    You may use the data given in this document for your personal use. If you use this document for a publication, you have to cite the source. A publication of a recompilation of the given material is not allowed, if the resulting product is sold for more than the production costs.

    This document may accidentally refer to trade names and trademarks, which are owned by national or international companies, but which are unknown by me. Their rights are fully recognized and these companies are kindly asked to inform me if they do not wish their names to be used at all or to be used in a different way.

    This document is part of a frame set and can be found by navigating from the entry point at the Web site http://www.MH-AeroTools.de/.

    Impressum und weitere rechtliche Hinweise für Deutschland